Description
1300 degrees of firepower
Anti-liquefaction system
Due to the characteristics of ordinary butane gas containers, if they are tilted or inverted, the liquid gas is sprayed directly, causing a large flame. The anti-liquefaction torch solves the above problems and allows you to work at any angle without difficulty.
High-quality premium gas lighters that have been rigorously tested for safety and quality
How to Use
How to install a gas cylinder
1) Before connecting the gas canister, make sure the rubber packing of the valve is intact.
2) Make sure the flame control knob is fully locked in the negative direction.
3) Rotate the gas container 35 degrees to the right while pressing down on the gas inlet or gas container groove to engage it.
*Never engage or disengage in the presence of an open flame.
Ignition
1) Ignite with a lighter or match in front of the cooking zone while slowly turning the flame control knob in the positive direction, and then gradually increase the flame power to maximum.
2) After ignition, turn the flame control knob to adjust the flame intensity to suit the intended use.
3) Do not place the gas container upside down in front of the ignition. Liquid may come out of the cooking zone, making ignition difficult, and the flame may ignite, which is dangerous. In this case, lock the control knob and upright the container to allow the gas to settle (10 to 20 seconds) before reigniting.
Extinguishing
1) Turn the flame control knob in the negative direction to extinguish the fire.
2) Be sure to check for complete extinguishing.
3) After use, be sure to store it separately from the gas container.
The package design of the actual product might vary depending on the design update by the manufacturer.
